Plasterboard cistern 12.5 cm built-in with frame for wall-hung toilet bowl and installation height 112 cm, from Swiss Aqua Technologies.
Suitable for a hanging basin with a connection distance of 18 cm or 23 cm, a floor thickness of up to 20 cm and installation of a double flush activation plate.
- Possibility to install remote flushing or sensor flushing
- Polystyrene insulation construction prevents condensation on the tank surface and reduces structural vibration
- The tank is made in one piece, making it 100% watertight
- Water connection from behind or above via G1/2″ mounting holes
PACKAGE CONTENTS
- Fixing kit for toilet bowl installation: M12 threaded rod – 2 pieces, washers – 4 pieces, cap – 2 pieces, nut – 2 pieces, thread protector – 2 pieces
- Fixing kit: Ø8×60 screws – 4 pcs., Ø12 plugs – 4 pcs
90/90 HT polyethylene drain elbow, PE-HD
- Two-part service opening cover, easily shortened
- Tank with filling and flushing valve
- 90/100 HT polyethylene waste reduction
- Set of plugs to protect connection holes during system installation
- Self-supporting frame connection
- 1/2″ screw connection for water connection with integrated angle valve Schell 1/2″-3/8″
- Drainage gasket, PP connector, connector gasket
- Entry, exit PP gasket, packaging gasket
Large flush |
6-9 L |
Small flush |
2,5-3,5 L |
Large flush factory setting |
6 L |
Small flush factory setting |
3 L |
Water volume in the tank |
9 L |
Recommended water pressure range |
0,3-0,5 MPa |
Functional water pressure range |
0,05-0,8 MPa |
Max load |
400 kg |
Find the suitable flush plate you like below.